What have you done to your Superduke today

general forum > questions . answers . discussions
arg
Minimoto racer
 
Posts: 31
Joined: Sun Dec 20, 2009 3:19 pm
Location: Biggleswade, UK

Re: What have you done to your Superduke today

Postby arg » Wed Sep 27, 2017 12:18 pm

Part ex it for a new one, wife not happy.

User avatar
andrej126
Newbie
 
Posts: 1
Joined: Wed May 20, 2015 8:07 am
Location: Slovenia (EU)

Re: What have you done to your Superduke today

Postby andrej126 » Thu Oct 05, 2017 10:37 am

Went to my first track day. Been a blast, will definitely go again :D

ImageIMG_1029 by Andrej Potočnik, on Flickr

User avatar
Adrock990r
Minimoto racer
 
Posts: 96
Joined: Thu Apr 03, 2014 7:22 am
Location: Brisbane, Australia.

Re: What have you done to your Superduke today

Postby Adrock990r » Tue Nov 14, 2017 5:02 pm

Showed some love to the 08 990sdr with HEL braided clutch and brake lines to replace the oem gear, had the forks serviced and the leak from the compression adjuster repaired (finally someone knew how to do it), added some more Probolt hardware, a set of Pirelli Supercorsa tyres, Healtech Quickshifter and gear indicator and fabricated and polished some aluminium into a bracket for the gear indicator.

Image
Image
Image
Image
Image

User avatar
Motogoon
Two wheeled terror
 
Posts: 125
Joined: Thu Jul 07, 2011 6:53 am
Location: NEW Zealand

Re: What have you done to your Superduke today

Postby Motogoon » Tue Nov 14, 2017 6:16 pm

Nice, I just had the 3 o-ring's replaced in my shock compression adjusters to stop a leak as well.

Did you have to cut in to any wires to fit that model gear indicator?

User avatar
Adrock990r
Minimoto racer
 
Posts: 96
Joined: Thu Apr 03, 2014 7:22 am
Location: Brisbane, Australia.

Re: What have you done to your Superduke today

Postby Adrock990r » Tue Nov 14, 2017 8:24 pm

Motogoon wrote:Nice, I just had the 3 o-ring's replaced in my shock compression adjusters to stop a leak as well.

Did you have to cut in to any wires to fit that model gear indicator?


Hi mate, you don't cut any wires at all with this type. Takes about 2 minutes to connect using the harness that you order with the gear indicator. The wire from the tacho is spliced onto using the supplied tap connector and the other connection is via a plug that goes inline with a 3 pin speedo plug.

User avatar
DukeNukem999
Two wheeled terror
 
Posts: 327
Joined: Tue Mar 22, 2016 1:32 am
Location: Bris-Vegas, Australia

Re: What have you done to your Superduke today

Postby DukeNukem999 » Tue Nov 14, 2017 10:51 pm

Fitted new tyres, went with PR4 Rear and PP3 front.
I rode 16500 kms on the last set with still a little bit left :)
2010 SD, Rottweiler intake / SAS removal, Akrapovic slipons, ergo seat, Scott's oil filter, factory alarm, SDR levers, Shorai (LiFePO4) battery, oem 16T / KTM Supersprox 40T, RK GB525GXW chain, Michelin Pilot Road 4 rear / Pilot Power 3 front.

Previous

Return to Hooliganism

Who is online

Users browsing this forum: No registered users and 7 guests