How do i connect a trickle charger to the battery?

Done a good mod that people might want to copy? Post it here - full step-by-step instructions and pix.

FAQs can go in here too
User avatar
donterob
Minimoto racer
 
Posts: 17
Joined: Wed Jan 11, 2012 4:31 am

How do i connect a trickle charger to the battery?

Postby donterob » Thu May 24, 2012 12:33 am

Hi SD Fans! I know this has been a topic many times before and i have read many threads about this topic; however, I need to know i'm getting this correct! I have connected a trickle charger pigtail to my battery but i think i must have it wrong. I connected the pigtail ilet rings (both of them to my battery). Red Positive and Black Neg; however, i note in thread viewtopic.php?f=5&t=10574&p=119095&hilit=battery#p119095 , the red positive is connected and the Neg is connected to somewhere earthed on the frame of the bike? So my question is... Can you not have the Black Neg connected to the battery as well or does it have to be connected to somewhere earthed on the frame?????
“If you can't convince them, confuse them.” - Harry S Truman

User avatar
Blackduke77
Two wheeled terror
 
Posts: 236
Joined: Sat Jan 23, 2010 8:06 pm
Location: Vernon, BC, Canada

Re: How do i connect a trickle charger to the battery?

Postby Blackduke77 » Thu May 24, 2012 2:02 am

I have mine attached directly to the negative On my battery, just make sure it's alson got a ground wire attached and it should be fine.


Return to How to do it!

Who is online

Users browsing this forum: No registered users and 2 guests