SAS Plates

Use this forum to list parts and accessories you are selling.

Include details of the part (part # if you know it), what bike it fits, age, condition, location and asking price.

Don't forget to add at least one picture
990SMR
Minimoto racer
 
Posts: 8
Joined: Fri Feb 10, 2012 8:49 pm
Location: Tampa Bay Area, FL

Re: SAS Plates

Postby 990SMR » Tue Feb 14, 2012 5:32 pm

Do you still have Black colored plates in stock?

User avatar
Anata
Stunt rider
 
Posts: 553
Joined: Tue Mar 10, 2009 9:25 pm
Location: Jersey, Channel Islands UK

Re: SAS Plates

Postby Anata » Sun Mar 04, 2012 10:20 pm

Any orange pairs still going?
05 SD
08 SD

timboo
Two wheeled terror
 
Posts: 173
Joined: Wed Feb 29, 2012 9:45 am

Re: SAS Plates

Postby timboo » Tue Mar 20, 2012 8:06 pm

Will they go on my 05 sduke
1998 - 01 Pug s fight 50 vreg
2001 - 02 derby 50 wreg
2004 - 06 Yam r6 03 carbon + ohlins and akra
2009 - 10 yam r6 07 carbon + ohlins and akra
2011 - 12 Yamaha Xt660 07 Mtc cans
2012 - ktm superduke 05

User avatar
Bert
moderator
 
Posts: 1414
Joined: Wed Sep 01, 2010 7:43 am
Location: Ghent, Belgium

Re: SAS Plates

Postby Bert » Tue Mar 20, 2012 8:57 pm

timboo wrote:Will they go on my 05 sduke

sure!
2006 KTM Super Duke Titanium ~ Full Titanium Akra Evo ~ MH Motobox and flies
VW TSI 1.4 problemen

timboo
Two wheeled terror
 
Posts: 173
Joined: Wed Feb 29, 2012 9:45 am

Re: SAS Plates

Postby timboo » Tue Mar 20, 2012 10:51 pm

Bert wrote:
timboo wrote:Will they go on my 05 sduke

sure!

Does colour of the plates make a massive difference I looked at the guide are they clearly visible when fitted
1998 - 01 Pug s fight 50 vreg
2001 - 02 derby 50 wreg
2004 - 06 Yam r6 03 carbon + ohlins and akra
2009 - 10 yam r6 07 carbon + ohlins and akra
2011 - 12 Yamaha Xt660 07 Mtc cans
2012 - ktm superduke 05

User avatar
Colonel_Klinck
moderator
 
Posts: 10353
Joined: Sat Jul 12, 2008 7:23 pm
Location: North London UK. The right side of the river!

Re: SAS Plates

Postby Colonel_Klinck » Tue Mar 20, 2012 11:13 pm

You can only see the rear one.
"They lie about marijuana. Tell you pot-smoking makes you unmotivated. Lie! When you're high, you can do everything you normally do, just as well. You just realise that it's not worth the f*cking effort. There is a difference."
The late Bill Hicks

timboo
Two wheeled terror
 
Posts: 173
Joined: Wed Feb 29, 2012 9:45 am

Re: SAS Plates

Postby timboo » Wed Mar 21, 2012 9:29 am

Colonel_Klinck wrote:You can only see the rear one.


On an orange sduke 05 which colour would be best As i can't picture where the back one would be in relation to mine has anyone got a pic of one fitted to assist by any chance
1998 - 01 Pug s fight 50 vreg
2001 - 02 derby 50 wreg
2004 - 06 Yam r6 03 carbon + ohlins and akra
2009 - 10 yam r6 07 carbon + ohlins and akra
2011 - 12 Yamaha Xt660 07 Mtc cans
2012 - ktm superduke 05

User avatar
Mr_Trecolareco
Wheelie king
 
Posts: 1201
Joined: Thu Jun 19, 2008 8:31 pm
Location: Lisbon, Portugal

Re: SAS Plates

Postby Mr_Trecolareco » Wed Mar 21, 2012 10:07 am

timboo wrote:
Colonel_Klinck wrote:You can only see the rear one.


On an orange sduke 05 which colour would be best As i can't picture where the back one would be in relation to mine has anyone got a pic of one fitted to assist by any chance


I haven't choosen orange because already have an 05 Orange SD with orange frame plugs and bars plugs :lol:
Um abraco e mto boas curvas!! :)
Image

timboo
Two wheeled terror
 
Posts: 173
Joined: Wed Feb 29, 2012 9:45 am

Re: SAS Plates

Postby timboo » Wed Mar 21, 2012 10:15 am

hmmmm having said that people are asking on here for these plates but no response lol. seriously which colour ya recommend?
1998 - 01 Pug s fight 50 vreg
2001 - 02 derby 50 wreg
2004 - 06 Yam r6 03 carbon + ohlins and akra
2009 - 10 yam r6 07 carbon + ohlins and akra
2011 - 12 Yamaha Xt660 07 Mtc cans
2012 - ktm superduke 05

User avatar
Mr_Trecolareco
Wheelie king
 
Posts: 1201
Joined: Thu Jun 19, 2008 8:31 pm
Location: Lisbon, Portugal

Re: SAS Plates

Postby Mr_Trecolareco » Wed Mar 21, 2012 10:44 am

Ben is a cool guy, as answered every mail quickly, unfortunetely he had none fabricated so it takes a while to cut them, anodised, laser etch them and send (it's his side job, not his profession )

But hopefully mine will arrive shortly, so you should have some ready also.

Send him a mail and check your hurry. I had none, so I prefered to wait and help out a fellow SDuker 8)

I've choosen black, but grey would be nice too. Like i've said orange for me would be too much...
Um abraco e mto boas curvas!! :)
Image

User avatar
Mr_Trecolareco
Wheelie king
 
Posts: 1201
Joined: Thu Jun 19, 2008 8:31 pm
Location: Lisbon, Portugal

Re: SAS Plates

Postby Mr_Trecolareco » Tue Mar 27, 2012 5:44 pm

They have arrived and look great.

I'll take a few shots when I install them.

Image
Um abraco e mto boas curvas!! :)
Image

iannowi
Two wheeled terror
 
Posts: 128
Joined: Mon Nov 07, 2011 8:34 am

Re: SAS Plates

Postby iannowi » Tue Mar 27, 2012 6:24 pm

good luck with the install...right hand side is a bitch to replace

User avatar
Mr_Trecolareco
Wheelie king
 
Posts: 1201
Joined: Thu Jun 19, 2008 8:31 pm
Location: Lisbon, Portugal

Re: SAS Plates

Postby Mr_Trecolareco » Tue Mar 27, 2012 11:24 pm

iannowi wrote:good luck with the install...right hand side is a bitch to replace


So i've heard, I'm counting with my wifey tiny hands to get the job done, no pun intended :twisted:
Um abraco e mto boas curvas!! :)
Image

User avatar
jambox
Trackday hero
 
Posts: 2003
Joined: Sun Oct 04, 2009 9:18 pm
Location: Perth. The shite cold one, not the decent warm one

Re: SAS Plates

Postby jambox » Tue Apr 03, 2012 9:59 pm

Anyone got the silver ones of these? If so, how do they match the colour of the engine?
05/06 SD, too raw for the journos!

timboo
Two wheeled terror
 
Posts: 173
Joined: Wed Feb 29, 2012 9:45 am

Re: SAS Plates

Postby timboo » Sat Apr 07, 2012 10:41 am

jambox wrote:Anyone got the silver ones of these? If so, how do they match the colour of the engine?

That's exactly Wat my point was would be cool to see them on a bike as I been wondering which colour is best
1998 - 01 Pug s fight 50 vreg
2001 - 02 derby 50 wreg
2004 - 06 Yam r6 03 carbon + ohlins and akra
2009 - 10 yam r6 07 carbon + ohlins and akra
2011 - 12 Yamaha Xt660 07 Mtc cans
2012 - ktm superduke 05

User avatar
jambox
Trackday hero
 
Posts: 2003
Joined: Sun Oct 04, 2009 9:18 pm
Location: Perth. The shite cold one, not the decent warm one

Re: SAS Plates

Postby jambox » Mon Apr 09, 2012 10:41 pm

timboo wrote:
jambox wrote:Anyone got the silver ones of these? If so, how do they match the colour of the engine?

That's exactly Wat my point was would be cool to see them on a bike as I been wondering which colour is best

I've just ordered some, so will put up some pics once I've fitted them (won't be til next month).

Been looking though the "show ya SD" thread and found a couple which have some silver ones. They don't look like they are the same colour as the surrounding casings, but that won't bother me as they don't seem that noticeable that they stand out.
05/06 SD, too raw for the journos!

User avatar
Superdan
Thunder pumpkin rider
 
Posts: 6163
Joined: Wed Mar 28, 2007 1:58 pm
Location: North Lincs UK

Re: SAS Plates

Postby Superdan » Tue Apr 10, 2012 6:48 am

http://www.google.co.uk/imgres?q=sas+bl ... s:51,i:201

Just go google SAS Blanking plates Superduke, silver, black etc etc

User avatar
jambox
Trackday hero
 
Posts: 2003
Joined: Sun Oct 04, 2009 9:18 pm
Location: Perth. The shite cold one, not the decent warm one

Re: SAS Plates

Postby jambox » Sat Apr 14, 2012 12:23 pm

Got my silver ones in the post yesterday. Cheers Millar, your a star.

Just need my bike back to fit them on :roll:
05/06 SD, too raw for the journos!

User avatar
stalker
Wheelie king
 
Posts: 1334
Joined: Wed Jul 23, 2008 5:35 am
Location: sussex

Re: SAS Plates

Postby stalker » Thu Apr 26, 2012 10:07 pm

thanks millar . 8)
The King Of Cadwell

NO LIMITS OPEN 1000CC ENDURANCE CHAMPION #6

User avatar
CADScott
Minimoto racer
 
Posts: 43
Joined: Wed Mar 14, 2012 2:34 am
Location: Melbourne, Australia

Re: SAS Plates

Postby CADScott » Thu May 24, 2012 12:01 am

Any more of these available, preferably in black?
2010 Super Duke R
TuneECU remap (08-10_EU_SDR_Akra_map_Smoothened.hex)
SAS removed
Yoshi Cans
R&G Frame Sliders
Rizoma MA010 Bars

User avatar
Millar
Wheelie king
 
Posts: 1004
Joined: Mon Aug 14, 2006 8:08 pm
Location: London

Re: SAS Plates

Postby Millar » Wed May 30, 2012 9:50 pm

I'm getting another load next week. I'm simplifying things and getting the whole lot done in black.
I was previously doing my own anodising on a small DIY scale, doing four sets at a time.
Unfortunately I don't have time to do this anymore , due to my work load in running my workshop.

I'll post up when they are ready to go.

User avatar
CADScott
Minimoto racer
 
Posts: 43
Joined: Wed Mar 14, 2012 2:34 am
Location: Melbourne, Australia

Re: SAS Plates

Postby CADScott » Wed May 30, 2012 10:09 pm

Cool, put me down for a set, and I might need 2 more sets for some buddies.
2010 Super Duke R
TuneECU remap (08-10_EU_SDR_Akra_map_Smoothened.hex)
SAS removed
Yoshi Cans
R&G Frame Sliders
Rizoma MA010 Bars

User avatar
The Gin Reaper
moderator
 
Posts: 1055
Joined: Mon Mar 22, 2010 10:18 pm
Location: inspecting the tarmac at most racetrack hairpins.....Naarfolk ingerland

Re: SAS Plates

Postby The Gin Reaper » Wed May 30, 2012 10:41 pm

yes please..... set for me too.....
Favourite quote - "after watching him take everything so in his bloody stride, it made Jim Lovell look like a panicky little bitch!"

never argue with an idiot..... they will drag you down to their level and beat you with experience....

User avatar
41KS
Two wheeled terror
 
Posts: 428
Joined: Fri Apr 13, 2012 8:34 am
Location: España

Re: SAS Plates

Postby 41KS » Wed Jun 13, 2012 6:36 pm

Would take another set of SAS plates, thanks in advance and PM-sent.
365 days a year perfect motorcycling weather in Europe! Where?? Investment properties in Spain, Costa Del Sol: http://www.sunavenuehomes.com

RamblinWreck
Minimoto racer
 
Posts: 25
Joined: Fri Oct 05, 2012 8:33 pm

Re: SAS Plates

Postby RamblinWreck » Tue Oct 16, 2012 2:20 pm

pm sent

PreviousNext

Return to Parts and accessories for sale

Who is online

Users browsing this forum: Google [Bot] and 4 guests