Rear axle, nut and adjuster blocks for 990

Use this forum to list parts and accessories you are selling.

Include details of the part (part # if you know it), what bike it fits, age, condition, location and asking price.

Don't forget to add at least one picture
User avatar
bic_bicknell
moderator
 
Posts: 3836
Joined: Sun Sep 13, 2009 7:11 am
Location: Bristol

Rear axle, nut and adjuster blocks for 990

Postby bic_bicknell » Mon Jun 20, 2016 4:53 pm

Rear axle and nut to fit all year 990s. Comes complete with the two alloy adjusting blocks.

This is from my bike which was a 2007 model. In good used condition with no major defects.

£10.00

Postage in the UK is likely to be about £4 but I'd have to wrap one up and get an accurate quote for shipping to Europe, the US or Aus. [URL=http://s917.photobucket.com/user/bic_bicknell/media/DSC_0024_zpsua1vzrst.jpg.html]Image[/URL
Past: Honda CB125J, Honda TL125, 1963 Triumph Tiger 90, Yamaha RD250, Kawasaki KH250, Kawasaki 400 S3, Kawasaki KH400, Kawasaki Z400J, Suzuki GS750, Suzuki GS1000, Ducati SS900 Superlight, KTM LC4 Supermoto, Honda VFR 800i, KTM Superduke '07.

User avatar
Motogoon
Two wheeled terror
 
Posts: 191
Joined: Thu Jul 07, 2011 6:53 am
Location: NEW Zealand

Re: Rear axle, nut and adjuster blocks for 990

Postby Motogoon » Fri Sep 08, 2017 11:00 pm

Long shot I know but do you still have this? mine has cracked, as they do!

User avatar
Colonel_Klinck
moderator
 
Posts: 10368
Joined: Sat Jul 12, 2008 7:23 pm
Location: North London UK. The right side of the river!

Re: Rear axle, nut and adjuster blocks for 990

Postby Colonel_Klinck » Fri Sep 08, 2017 11:34 pm

Motogoon wrote:Long shot I know but do you still have this? mine has cracked, as they do!


I have a rear axle for the 990. Not sure on P&P cost to NZ though.

Edit: P&P is £35
"They lie about marijuana. Tell you pot-smoking makes you unmotivated. Lie! When you're high, you can do everything you normally do, just as well. You just realise that it's not worth the f*cking effort. There is a difference."
The late Bill Hicks

User avatar
Motogoon
Two wheeled terror
 
Posts: 191
Joined: Thu Jul 07, 2011 6:53 am
Location: NEW Zealand

Re: Rear axle, nut and adjuster blocks for 990

Postby Motogoon » Sat Sep 09, 2017 9:07 pm

Hey Klink, how much do you want for the axle on top of the shipping?

As per usual KTM New Zealand don't have anything available, 115 nzd and a 4 week wait from Austria, I swear KTM NZ doesn't carry anything except oil filters in stock :x

I am also waiting to hear from cj designs in the US how much to send some of their billet blocks to NZ, KTM Twins in the US wanted 200 USD for shipping!!!
Last edited by Motogoon on Sun Sep 10, 2017 9:55 pm, edited 1 time in total.

User avatar
05DUKE
Minimoto racer
 
Posts: 21
Joined: Sun May 07, 2017 11:54 pm
Location: NZ

Re: Rear axle, nut and adjuster blocks for 990

Postby 05DUKE » Sun Sep 10, 2017 10:47 am

I just waited 4weeks for the oil filter kit from Austria, My local dealer said I should buy a newer
model if I didn't like waiting for parts.
I don't no why business still use the Japanese warehousing theory!! Don't keep parts in stock..

User avatar
Motogoon
Two wheeled terror
 
Posts: 191
Joined: Thu Jul 07, 2011 6:53 am
Location: NEW Zealand

Re: Rear axle, nut and adjuster blocks for 990

Postby Motogoon » Sun Sep 10, 2017 10:01 pm

05DUKE wrote:I just waited 4weeks for the oil filter kit from Austria, My local dealer said I should buy a newer
model if I didn't like waiting for parts.
I don't no why business still use the Japanese warehousing theory!! Don't keep parts in stock..


Haha what a slap in the face, load of rubbish from the dealer saying a newer bike would solve the problem. There's been several times I've needed basic parts that cross reference with a current model and it's still only been available ex Austria!

Klink I have someone sorted in the US who can send some CJ Designs blocks so if that goes well I should be all good, I figure as I'm planning to keep the bike for a long timethat I should probably get the stronger version!!

User avatar
ktmsuperdukeeddie
Two wheeled terror
 
Posts: 454
Joined: Mon May 18, 2009 4:11 pm
Location: LIVERPOOL

Re: Rear axle, nut and adjuster blocks for 990

Postby ktmsuperdukeeddie » Thu May 24, 2018 9:13 pm

Bic have you still got this ?
My left adjuster block is cracked.

User avatar
nampus
Stunt rider
 
Posts: 769
Joined: Thu Nov 04, 2010 4:24 pm
Location: The Netherlands

Re: Rear axle, nut and adjuster blocks for 990

Postby nampus » Fri May 25, 2018 7:39 am

Just out of curiosity, did you run the adjuster blocks the other way round to shorten the wheelbase/fit a 40t rear sprocket with the standard length chain?

User avatar
ktmsuperdukeeddie
Two wheeled terror
 
Posts: 454
Joined: Mon May 18, 2009 4:11 pm
Location: LIVERPOOL

Re: Rear axle, nut and adjuster blocks for 990

Postby ktmsuperdukeeddie » Fri May 25, 2018 9:12 am

Funny you should ask as just fitted a 39 tooth sprocket and new chain.

User avatar
nampus
Stunt rider
 
Posts: 769
Joined: Thu Nov 04, 2010 4:24 pm
Location: The Netherlands

Re: Rear axle, nut and adjuster blocks for 990

Postby nampus » Fri May 25, 2018 4:07 pm

With the adjusters flipped 180°?

User avatar
ktmsuperdukeeddie
Two wheeled terror
 
Posts: 454
Joined: Mon May 18, 2009 4:11 pm
Location: LIVERPOOL

Re: Rear axle, nut and adjuster blocks for 990

Postby ktmsuperdukeeddie » Fri May 25, 2018 5:39 pm

Had block adjusters in normal position

User avatar
Motogoon
Two wheeled terror
 
Posts: 191
Joined: Thu Jul 07, 2011 6:53 am
Location: NEW Zealand

Re: Rear axle, nut and adjuster blocks for 990

Postby Motogoon » Fri May 25, 2018 8:02 pm


User avatar
ktmsuperdukeeddie
Two wheeled terror
 
Posts: 454
Joined: Mon May 18, 2009 4:11 pm
Location: LIVERPOOL

Re: Rear axle, nut and adjuster blocks for 990

Postby ktmsuperdukeeddie » Fri May 25, 2018 8:10 pm

Great stuff thank you.

User avatar
ktmsuperdukeeddie
Two wheeled terror
 
Posts: 454
Joined: Mon May 18, 2009 4:11 pm
Location: LIVERPOOL

Re: Rear axle, nut and adjuster blocks for 990

Postby ktmsuperdukeeddie » Fri May 25, 2018 8:24 pm

Was going to buy them but they want credit card details.
Would prefare paylal.

User avatar
ktmsuperdukeeddie
Two wheeled terror
 
Posts: 454
Joined: Mon May 18, 2009 4:11 pm
Location: LIVERPOOL

Re: Rear axle, nut and adjuster blocks for 990

Postby ktmsuperdukeeddie » Fri May 25, 2018 10:32 pm

£11.69 on ebay for the pair.

Gaztwobikes
Minimoto racer
 
Posts: 47
Joined: Sun Sep 21, 2014 6:41 pm
Location: Selby ,North Yorkshire , england

Re: Rear axle, nut and adjuster blocks for 990

Postby Gaztwobikes » Fri Jun 08, 2018 5:03 pm

Got some of these for my 1050 ,but how do you get the end off the sprocket side ,seems well stuck in place all I did was mark the shaft when trying grips ,,

User avatar
Motogoon
Two wheeled terror
 
Posts: 191
Joined: Thu Jul 07, 2011 6:53 am
Location: NEW Zealand

Re: Rear axle, nut and adjuster blocks for 990

Postby Motogoon » Thu Jun 14, 2018 8:10 pm

Gaztwobikes wrote:Got some of these for my 1050 ,but how do you get the end off the sprocket side ,seems well stuck in place all I did was mark the shaft when trying grips ,,


Try a heat gun


Return to Parts and accessories for sale

Who is online

Users browsing this forum: No registered users and 0 guests