Tail tidy

Done a good mod that people might want to copy? Post it here - full step-by-step instructions and pix.

FAQs can go in here too
Dirtydutch
Minimoto racer
 
Posts: 60
Joined: Sun Oct 09, 2016 4:16 pm
Location: Biw

Tail tidy

Postby Dirtydutch » Sun Jul 01, 2018 9:27 am

Hy guys .

Having a small problem , fitted carbon leovince dampers but they are conflicting with the blinkers and license plate
I think i have an evotech tailtidy . Now i'm looking for a better fitting one if any ?before hacking the sucker up..

Black Out
Minimoto racer
 
Posts: 61
Joined: Mon Mar 20, 2017 6:56 pm
Location: Raleigh NC

Re: Tail tidy

Postby Black Out » Mon Jul 02, 2018 7:34 pm

I folded the plate after the rear wheel caught it during wheelies. Decided not to run a plate anymore. Just keep it under your seat if you get pulled over.
Ducati Monster 800
Triumph Speed Triple 1050
KTM SuperDuke 990

norman_2009
Minimoto racer
 
Posts: 57
Joined: Thu Jul 23, 2015 4:08 pm
Location: UP, Michigan

Re: Tail tidy

Postby norman_2009 » Tue Jul 03, 2018 12:41 am

The competition works tail tidy will not help you at all. The signals would not fit with my akra evo. I suggest buying an integrated tail light.

Sent from my SM-G950U using Tapatalk
Current Bikes:2015 390 Duke 2008 990 SuperDuke 2004 DL1000
Previous Bikes: 2003 SV1000s 1994 Virago 750

User avatar
battleshaft
Minimoto racer
 
Posts: 50
Joined: Wed Jan 18, 2017 2:28 pm
Location: Somerset, UK

Re: Tail tidy

Postby battleshaft » Tue Jul 03, 2018 10:41 am

Smaller blinkers and plate? :D

Dirtydutch
Minimoto racer
 
Posts: 60
Joined: Sun Oct 09, 2016 4:16 pm
Location: Biw

Re: Tail tidy

Postby Dirtydutch » Tue Jul 03, 2018 6:47 pm

I have the led ones from ktm and realy like them , so i want to keep those .

Currently browsing the innerweb for options.

Maybe this can be made .https://rover.ebay.com/rover/0/0/0?mpre ... 3005384912

User avatar
ojw123
Minimoto racer
 
Posts: 5
Joined: Fri Sep 22, 2017 11:29 am
Location: Gloucestershire

Re: Tail tidy

Postby ojw123 » Thu Jul 05, 2018 7:26 am

I'm using the evotech one with Akros and I managed to use the little kinked brackets that came with it to move the indicators down below the cans;

Image

An ever so slightly smaller plate just fits in between the two cans without looking overly tiny. If I need to have the full size plate back on, I've made up a little flat adaptor plate to offset it down below the cans too.

Dirtydutch
Minimoto racer
 
Posts: 60
Joined: Sun Oct 09, 2016 4:16 pm
Location: Biw

Re: Tail tidy

Postby Dirtydutch » Sat Jul 07, 2018 7:45 am

Update.

I found tru another sd rider another solution .kinda ghetto but it works.

Fitted some pipeclamps to the subframe now there is enough clearence and looks alot better . Pipes follow the seat more


Return to How to do it!

Who is online

Users browsing this forum: No registered users and 1 guest

cron